What temperature do pennies melt at

What temperature will a penny melt at

http://www.chacha.com/question/what-temperature-will-a-penny-melt-at

A penny is made of copper,the melting point of copper is 1984.32 degrees F. Therefore that would be the melting point of a penny.

What Temperature Is Copper Melted?

http://www.blurtit.com/q6236465.html

Choose whichever scale you wish: 1357.77 K, 1084.62 °C, 1984.32 °F

What is the melting point or flash temperature of a penny??

http://www.chacha.com/question/what-is-the-melting-point-or-flash-temperature-of-a-penny%3F-are-all-coins-the-same-point

The melting point of Copper is 1981 degrees F and the melting point of Zinc is 787 degrees F. New Pennies are mostly zinc.

Related Questions Answered on Y!Answers

Physics questions on “Latent heat and phase change”?

Q: 1. a 50-g ice cube at 0′ C is heated until 45 g has become water at 100′ C and 5.0 g has become steam at 100′ C. How much energy was added to accomplish the transformation?2. A 100-g cube of ice at 0′ C is dropped into 1.0 kg of water that was originally at 80′ C. What is the final temperature of the water after the ice has melted?3. How much energy is required to change a 40-g ice cube from ice at -10′ C to steam at 110′ C?4. A high-end gas stove usually has at least one burner rated at 14,000 Btu/h. If you place a 0.25-kg aluminum pot containing 2.0 liters of water at 20′ C on this burner, how long will it take to bring the water to a boil, assuming all of the heat form the burner goes into the pot? How long will it take to boil all of the water out of the pot?5. A beaker of water sits in the sun until it reaches an equilibrium temperature of 30′ C. The beaker is made of 100 g of aluminum and contains 180 g of water. In an attempt to cool this system, 100 g of ice at 0′ C is added to the water. (a) Determine the final temperature of the system. If Tf = 0′ C, determine how much ice remains. (b) Repeat your calculations for 50 g of ice.6. Steam at 100′ C is added to ice at 0′ C. (a) Find the amount of ice melted and the final temperature when the mass of steam is 10 g and the mass of ice is 50 g. (b) Repeat with steam of mass 1.0 g and ice of mass 50 g.7. A 40-g ice cube floats in 200 g of water in a 100-g copper cup; all are at a temperature of 0′ C. A piece of lead at 98′ C is dropped into the cup, and the final equilibrium temperature is 12′ C. What is the mass of the lead?8. A 200-g block of copper at a temperature of 90′ C is dropped into 400 g of water at 27′ C. The water is contained in a 300-g glass container. What is the final temperature of the mixture?9. A 3.00-g copper penny at 25.0′ C drops 50.0 m to the ground. (a) If 60% of the initial potential energy associated with the penny goes into increasing its internal energy, determining the final temperature of the penny. (b) Does the result depend on the mass of the coin? Explain.10. Three liquids are at temperatures of 10′ C, 20′ C, and 30′ C, respectively. Equal masses of the first two liquids are mixed, and the equilibrium temperature is 17′ C. Equal masses of the second and third are then mixed, and the equilibrium temperature is 28′ C. Find the equilibrium temperature when equal masses of the first and third are mixed.11. What mass of steam initially at 130′ C is needed to warm 200 g of water in a 100-g glass container from 20.0′ C to 50.0′ C?

A: You have included too many questions in your posting. I would recommend breaking it into many questions and repostingI’ll show you the first one.It takes 3 steps to accomplish this problem..Step 1 = melt the ice using Q = m*Lf = 0.050kg*3.34×10^5J/kg = 16700JStep 2 raise the temp from 0 to 100 using m*c*deltaT = 0.050kg*4186J/kg*(100) = 20930JStep 3 vaporize 5 g of water usin Q = m*Lv = 0.005kg*2.26×10^6J/kg = 11300JSo the total energy = 16700 + 20930 + 11300 = 48930J

Physics questions… Help please I have been working on my physics questions al weekend long… Please help.?

Q: PHYSICS PROBLEMS A taxi driver dives an automobile of mass 1500kg at a speed of 5m/s. How many calories of heat are transferred in the break mechanism when he stops at a stop sign? A) 4479cal B) 48.87cal C) 7568 cal D) 3.750 cal I each cycle (stroke) a heat engine absorbs 375J of heat and perform 25J of work. If it makes a 10 cycle per second find the power out put of this engine A) 2,500W B) 37.5 C) 3,750w D) 250w How much heat is required to change 200g of water at +30 Celsius to steam at +11 Celsius A) 1.29 x 10 (5 th power) B) 7.06 x 10 (4 power) C) 5.15 x 10 (5 th power) D) 6.20 x 10 (4 th power) A 200g of ice cube at 0 Celsius is placed in 800g of water at 2300. What is the final (equilibrium) temp of mixture A) 3.56 Celsius B) 2.44 Celsius C) 7.06 x 10 (4 th power) D) 277 Celsius How many calories of heat energy are used up if a person lifts a mass of 132.2lb ten times? (Assume that he drops it to the floor each time. Ignore the other biological factors involved in this problem A) 2814 cal B) 1404 cal C) 1295 cal D) 30903 cal In t he lab experiment a student immersed 100 cooper pennies (mass 3g each) boiling water at 100 Celsius. After they reached 100 Celsius she fished them out and dropped them into a 0.2kg of water at 20 Celsius. What was the final equilibrium temperature of the system A) 22.4 Celsius B) 29.7 Celsius C) 24.0 Celsius D) 11.1 Celsius If the rate of heat flow into a cooler made of Styrofoam is 10J/s. What is the mass of ice that is melted (in the cooler) in a whole day? ( Assume uniform heat flow throughout the 24hours) A) 1.82 Kg B) 0.043Kg C) 0.382Kg D) 2.59 Kg A brass cube 10cm on a side is raised in temperature by 200 Celsius. The coefficient of volume expansion of brass is 57 x 10 (-6 power). By what percentage does volume increase A) 12 % B) 2.8% C) 1.14% D) 0.86% Concert the specific heat c apacity of lead 128 J/Kg x Celsius INTO Cal / grams x Celsius A) 0.093 B) 0.215 C) 0.031 D) 0.499 A rectangular steel plate with dimensions of 30cm x 25cm is heated 20 Celsius to 220 Celsius. What is the change in area ( coefficient of linear expansions for steel is 11 x 10 ( -6 power)/ Celsius) A) 0.82cm (squared) B) 1.65cm (squared) C) 3.3cm (squared) D) 606cm (squared) Two moles of an ideal gas at 3.0atm and 10 Celsius are heated up to 150 Celsius. If the volume is held constant during the heating what is the final pressure? A) 4.5atm B) 1.8atm C) 0.14atm D) 1.0atm Formulas – Expansions of Solids – Basic Heat Formulas – Joule – Calorie – Temperature Conversions – Rate of Heat Flow. Thermal Conductivit y – Expansion of Liquid & Gases – Pressure Volume and Temperature – Engine Formulas & Explanations – How much heat needed – Heat and speed – Q=nmgh – Internal Energy – Piston movement – Isobaric work Formula – Isothermic work formula_______________________________________I have done all of the questions… I worked them all out.. the problems is I do not know if I have the correct answers..

A: I’ll do the first one for you, but your expectations of poeple are way too high! You should never lay this much of your own work on others!1. KE = 0.5mv^2= 0.5(1500kg)(5.0m/s)^2= 18,750J18,750J = 18,750J(0.239cal / 1.00J)= 4481.25calSo A for 1.Good luck.